What Is The Adsorption Principle Of Coconut Shell Activated Carbon?
The pore structure of the Coconut Shell Activated Carbon is very developed, and the size of these pores is all nanometers. Coconut shell activated carbon adsorption is to form a layer of balanced surface concentration on the surface of the particles, and then adsorb organic impurities into the activated carbon particles. The initial adsorption effect is very high, but the adsorption capacity of activated carbon will be weakened to varying degrees for a long time, the adsorption effect will also decrease, and the activated carbon will soon lose its filtering function. Therefore, Coconut Shell Carbons should be cleaned or replaced regularly.
The initial adsorption effect is very high, but the adsorption capacity of activated carbon will be weakened to varying degrees for a long time, the adsorption effect will also decrease, and the activated carbon will soon lose its filtering function. Therefore, Activated Carbon should be cleaned or replaced regularly.
Vertival Activated Carbon Furnace
Three precautions for using coconut shell activated carbon
The term coconut shell activated carbon is familiar to everyone. It is representative of the use of activated carbon in the activated carbon, its strong adsorption capacity, and its high iodine value.
Before use. 1 should be cleaned to remove dust. Without washing off the dust, it will enter the water along with the activated carbon, affecting the water quality. And don’t wash it directly with tap water that has just been flushed out, because activated carbon will absorb chlorine and bleaching powder in tap water, which will destroy the water quality when it is used in the filter later.
In use. 2 The use of activated carbon is good or bad. The amount of use is related. It is good to use more results. Considering the high price of coconut shell activated carbon, we put as much as possible according to our own strength. A bit of fish users should pay attention to the need to add activated carbon to the fish pond in the treatment of fish diseases, because the activated carbon will adsorb drugs, and the treatment effect will not be good.
Activated carbon is replaced regularly after use. The main purpose is to simply clean the activated carbon and cannot remove the clogging in the activated carbon gap. If it is not replaced, the activated carbon will lose its effectiveness after the gap is blocked and cannot achieve the purpose of purification. We can put a certain amount of coconut shell activated carbon and observe the changes in water quality when we first use it, and see how long the activated carbon can be used without replacement. Use this time as the basis for the activated carbon replacement time. Of course, you should not wait for the activated carbon to be replaced when it is not effective. You must advance the time to ensure the cleaning effect. It is recommended that you do not want to test it and replace it within two months.
